Canon MultiPASS C530 Service Manual page 208

c) V.34 G3 signal transmission test (MultiPASS C560 only)
The V.34 G3 signal transmision test menu is selected by pressing the 8 key from the MODEM NCU test
menu. The V.34 G3 signals below are sent from the modem using the modular jack and the speaker by
pressing the start key.
The Baud rate can be changed with the numeric keys, and the Speed can be changed with the search
keys.
Numeric key Baud rate
0 3429 baud
1 3200 baud
2 3000 baud
3 2800 baud
4 2743 baud (Not used)
5 2400 baud
Search key Speed
12000 bps
14400 bps
16800 bps
19200 bps
21600 bps
24000 bps
26400 bps
28800 bps
31200 bps
33600 bps
The transmission level for each frequency follows the service data.
NOTE
MultiPASS C530/C560 Chapter 3: Maintenance & Service
2400 bps
4800 bps
7200 bps
9600 bps
3-51