Canon MultiPASS C530 Service Manual page 185

MultiPASS C530/C560 Chapter 3: Maintenance & Service
• The reading image is abnormal. (Evaluation criteria: Check the copy image's faults.)
Nothing is printed.
(1) Check the connection between the contact sensor and SPCNT board (J31).
(2) Clean the white sheet.
(2) Replace the contact sensor assembly.
(3) Replace the SPCNT board.
The image has vertical stripes.
(1) Clean the contact sensor's reading glass.
(2) Clean the white sheet.
(3) Check the connection between the contact sensor and SPCNT board (J31).
(4) Replace the contact sensor assembly.
The image has thick vertical stripes.
(1) Clean the contact sensor's reading glass.
(2) Clean the white sheet.
(3) Make sure the document is not slanted.
(4) Check the connection between the contact sensor and SPCNT board (J31).
(5) Replace the contact sensor assembly.
The halftone image contains black dots.
(1) Clean the contact sensor's reading glass.
(2) Clean the white sheet.
(3) Check the connection between the contact sensor and SPCNT board (J31).
(4) Adjust the CS LED lights-on duration. See Page 3-6 .
(5) Replace the contact sensor assembly.
(6) Replace the SPCNT board.
The color or brightness of the image is not normal.
(1) Clean the contact sensor's scanning glass.
(2) Clean the white sheet.
(3) Adjust the CS LED lights-on duration. See Page 3-6 .
(4) Replace the contact sensor assembly.
(5) Replace the SPCNT board.
3-28