Fax/Tel Switching - Canon MultiPASS C530 Service Manual

MultiPASS C530/C560 Chapter 2: Technical Reference
7. COMMUNICATION SYSTEM OPERATIONS

7.1 FAX/TEL Switching

This fax is set to automatically switch between fax and telephone, on the same telephone line. If the other
party is a fax, the fax is received automatically, and if the other party is a telephone, the alarm in the main
unit is rung to alert the user.
7.1.1 Settings
(1) Press the Receive Mode button to select the Fax/Tel mode.
(2) Set the "FAX/TEL AUTO SW" in RX SETTINGS menu.
7.1.2 Parameters
Item
RING START TIME
(Pseudo Ring start time)
F/T RING TIME
(Pseudo Ring time)
DEFAULT ACTION
(Operation after FAX/TEL switching)
Pseudo RBT frequency
Pseudo RBT transmission from CML
on time until start (CNG detection time)
Pseudo RBT pattern on time
Pseudo RBT pattern off time (short)
Pseudo RBT pattern off time (long)
Pseudo RBT transmission level
Pseudo ring frequency
Pseudo ring pattern on time
Pseudo ring pattern off time (short)
Pseudo ring pattern off time (long)
CNG detection level
Default Setting
setting switch
8 sec. User data
15 sec. User data
RECEIVE User data
400 Hz None
4 sec. Service data #3 16
1000 ms Service data #3 17
0 ms Service data #3 18
2000 ms Service data #3 19
-23 dBm Service data #3 24
25Hz Service data #2 10
1000 ms Service data #3 20
0 ms Service data #3 21
2000 ms Service data #3 22
-47 dBm Service data #3 23
2-34
Selection
range
0 to 30 sec.
10 to 45 sec.
RECEIVE/
DISCONNECT
None (fixed)
0 to 9 sec.
0 to 9990 ms
0 to 9990 ms
0 to 9990 ms
-23 to -8 dBm
17Hz/25Hz/50Hz
0 to 9990 ms
0 to 9990 ms
0 to 9990 ms
-50 to -29 dBm
(MutiPASS C530 only)