Conditions Necessary For Color Reception - Canon MultiPASS C530 Service Manual

MultiPASS C530/C560 Chapter 2: Technical Reference
8.5.6 Operations where other machine does not have color communications
ability
When sending a color FAX where the other machine does not have color communications ability, this
machine informs the user by displaying "TRY AGAIN IN B/W" (#085).
In other words, it judges whether or not the other machine can receive in color according to the DIS from
the receiving machine. It does not automatically switch to BW and re-send. The following measures are
necessary for the user to deal with this situation depending on the other machine.
1. When the other machine is a BW FAX
The other machine can only receive BW images, so re-send as a normal BW Fax.
2. When the other machine is an ITU-T color communications-compatible FAX
The other machine is set to disallow color reception, or it is possible that color reception temporarily
cannot be done for some reason, so re-send after having the other party check the settings and set them to
allow color communication.

8.5.7 Conditions necessary for color reception

User data, types of installed cartridges, etc. Determine whether or not this machine can receive in color
as a transmitting machine. A necessary condition is that COLOR RX be set to ON.
Condition 1 : With COLOR RX ON and MEMORY RX OFF
Receives in color when printing can be done with a BC-21e cartridge installed. Color reception cannot be
done if a cartridge other than a BC-21e is installed, or if a no color ink error has been detected, etc.
Condition 2: With COLOR RX ON, MEMORY RX ON
If memory reception is possible, memory reception can be done in color regardless of the type of
cartridge installed.
NOTE
NOTE
When the settings in Desktop Manager are set to forward received data to a PC, memory
reception can be done even if MEMORY RX is OFF.
Forced printing using a cartridge other than a BC-21e BJ cartridge
Images received by color transmission cannot be automatically printed with a BJ
cartridge other than the BC-21e. If a cartridge other than the BC-21e is installed,
"CHANGE BC-21e" will be displayed, and memory reception will be done. With this
machine, color images received by memory reception may be output according to the
user operation. Output of images is done by choosing the desired TX/RX No. from the
Memory reference function's PRINT DOCUMENT menu.
2-76