Canon MultiPASS C530 Service Manual page 223

Hide thumbs Also See for MultiPASS C530:
Table of Contents

Advertisement

MultiPASS C530/C560 Chapter 3: Maintenance & Service
a-3) Service activity report (sending/receiving)
Header
TX/RX NO
CONNECTION TEL
(OTHER PARTY)
SUBADDRESS
CONNECTION ID
START TIME
USAGE TIME
PAGES
RESULT
MAKER CODE
RCV V.8 FRAME
SYMBOL RATE
TX LVL REDUCTION : 0 (Fixed)
ERR ABCODE
ERR SECTXB
ERR SECRXB
RX/TX
NOTE
Figure 3-32 Service Error Tx Report
: OK, NG messages
: Indicates four digits of the transaction number
: N u m b e r s e n t f r o m t h e o t h e r p a r t y o r n u m b e r d i a l l e d
(lower 20 digits)
: Subaddress number sent from the other party
: ID sent from the other party, if the other party is a Canon fax
: Communication start date and time (on 24-hour display)
: Communication time (in minutes and seconds)
: Number of pages for which transmission was complete
(For details, see User's manual )
: "NG" display with number of pages for which transmission was
fault, and service error code
: Maker code (For details, see Chapter 4: 4. MAKER-CODE on
page 4-7)
[1000
1000]
: Received V.8 protocol signal
: Symbol rate used for the primary channel
: Code output by the modem when an error occurred (Not used in the field)
: Transmit status of the modem when an error occurred (Not used in the
field)
: Received status of the modem when an error occurred (Not used in the
field)
: Received/transmitted protocol signal
bit 1 to bit 96 of received/transmitted DIS, DCS, or DTS
The V.8/V.34-related items (RCV V.8 FRAME to ERR SECRXB) are not printed on the
Notmal G3 Service Activity Report.
Indicates a Canon fax
lower nibble
upper nibble
3-66

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multipass c545Multipass c560Multipass c555Fp b740

Table of Contents