Specifying Settings For Limiting User Authentication To Only Scan Functions (Mode 479) - Konica Minolta BIZHUB 350 User Manual

Control Panel Settings
Specifying settings for limiting user authentication to only Scan
functions (mode 479)
Specify whether or not user authentication is performed only when the
[Fax/Scan] or [Extra Scan] key is pressed.
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were
selected. The numbers on the right side indicate the page numbers with
descriptions for the corresponding function.
Bit
7, 6, 5
4, 3, 2, 1, 0
Reminder
Do not specify settings for mode 479 other than those described in
"Specifying the setting".
!
Detail
If user authentication is limited to Scan functions, touch [Account/User
Auth.] in the Administrator Management 1 screen, and then select
"External Server" as the user authentication method. For details on the
external server authentication settings, refer to the User manual [Copy
Operations].
bizhub 350/250 (Phase 2.5)
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 (HEX: 00)
Description Setting
---------------------- 000
Specifies whether or 11001
not to limit authenti-
00000
cation on Fax and
Scan functions.
Description
*Do not change these bits
when specifying settings
for this function.
Limited
Not limited
6
Page
Reference
----------
----------
6-35