Specifying The Pressing Of The [Access] Key When Logging Off (Mode 438); Specifying Use Of Registered User Authentication Information To Log On To The Ldap Server (Mode 466) - Konica Minolta bizhub 200 User Manual

11
Bit
5
4, 3, 2, 1, 0

Specifying the pressing of the [Access] key when logging off (mode 438)

Select whether or not the [Access] key be pressed when logging off.
Settings at time of purchase
Bit
Setting
Specifying the setting
The shaded cells indicate the settings selected at the time of purchase.
Bit
7, 6, 5
4
3, 2, 1, 0
Specifying use of registered user authentication information to log on to
the LDAP server (mode 466)
Specify whether or not user names and passwords registered with user au-
thentication are used to log on to the LDAP server.
Settings at time of purchase
11-56
Description Setting
Specify whether or 0
not all settings in the
Basics screen are re-
set when copying is
1
finished using the
ADF.
----------------------- 00000
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 (HEX: 00)
Description Setting
----------------------- 000
Specify whether or 0
not the [Access] key
be pressed when log-
ging off.
1
----------------------- 0000
Utility mode
Description
Automatic panel reset
operation is not per-
formed.
Automatic panel reset
operation is per-
formed.
*
Do not change these
bits when specifying
settings for this func-
tion.
Description
*
Do not change these
bits when specifying
settings for this func-
tion.
Specifies that the [Ac-
cess] key not be
pressed when logging
off.
Specifies that the [Ac-
cess] key be pressed
when logging off.
*
Do not change these
bits when specifying
settings for this func-
tion.
200/250/350