Table of Contents
Advertisement
2a
Place power switch in the OFF position, shut off power
at the fuse or breaker box. Failme to do so could result
in electrical shock.
1. Follow steps 1, 2 and 3 in Removal of Control Panel.
2. Remove two 3/V nuts securing thermostat bracket to
control area.
3. Remove two screws holding thermostat to bracket.
4. On the inside of pot, loosen screws on bracket securing
thermostat bulb.
emove 11116" nut from pot wall and remove thermostat.
6. Install new thermostat in reverse order.
Advertisement
Table of Contents
