Table of Contents
Advertisement
ENVELOPE
(Co~ti~~ed)
Step 8
Step 10
tep 11
tep 12
8. Remove filter clips and discard the filter envelope.
9. Clean the top and bottom filter screen with soap and
water. Rinse thoroughly with hot water.
Be sure that the filter screens, crumb catcher, filter
clips, and the suction standpipe are thoroughly dry
before assembly of filter envelope, as water will dissolve
the filter paper.
10. Assemble the top filter screen to the bottom filter screen.
11. Slide the screens into a clean filter envelope.
12. Fold the corners in and then double fold the open end.
13. Clamp the envelope in place with two filter retaining clips.
14. Replace the crumb catcher screen on top of the filter paper.
Screw on the suction standpipe assembly.
15. Place complete filter screen assembly back into filter drain
pan. Slide pan back into place beneath the fryer.
16. Connect the filter union by hand. Do not use a wrench to
tighten.
17. Slide the condensation drain pan back into place. The fryer
is now ready to operate.
Advertisement
Table of Contents
