Henny Penny 520 Service Manual page 36

Step lb
1. Remove four screws securing control panel to unit and
also thermostat knob.
2. Unplug the nine pin connector.
3. Remove two wires from thermostat (wire number 13 &
16) and remove control panel.
Place power switch in the OFF position, shut off power
at the fuse or breaker box. Failure to do so could result
in electrical shock.
1. Follow steps 1, 2 and 3 in emoval of Control Panel.
'"
emove two screws from the buzzer coil bracket.
.,,,*i