Konica Minolta bizhub C550 User Manual page 459

Network Scanner Operations
7
Touch [User Box], and then select a user box.
8
Touch [Index], and then select the index characters.
9
Touch [OK].
10
Touch [Icon], and then select an icon.
– The icons are used in the image panel function which can be operated when the optional LK-101 is
installed.
11
Touch [OK], and then touch [OK] in the next screen that appears.
The user box destination is registered.
!
Detail
To check a registered destination, select it, and then touch [Check Job Set.].
To change the settings for a registered destination, select it, and then touch [Edit]. The registration
number cannot be changed in the Edit screen.
To delete a registered destination, select it, and then touch [Delete].
Note
The registration cannot be completed if no settings are specified for "Name" and "User Box".
To cancel the registration, touch [Cancel].
To finish specifying settings in the Utility mode, press the [Utility/Counter] key. Otherwise, exit the Utility
mode by touching [Close] in each screen until the screen for the Copy, Fax/Scan or Box mode appears.
bizhub C650/C550/C451 (FE3)
5
5-93