Copy Operations
5
Check the copy settings registered with the selected copy program.
6
Touch [Close].
The Recall Copy Program screen appears again.
7
Again touch the button for the copy program registered with the copy settings to be recalled.
–
If [OK] is touched with no copy program selected, the Basic screen appears again without a copy
program being recalled.
8
Touch [OK].
The programmed copy settings are recalled and the Basic screen appears again.
9
Press the [Start] key.
Copying begins with the recalled copy settings.
Note
To stop recalling a copy program, press the [Reset] key or the [Mode Memory] key or touch [Cancel].
bizhub C650/C550/C451 (FE3)
2
2-87