Sending A Fax Using A Program Destination; To Send A Fax After Specifying A Program Destination - Konica Minolta bizhub C550 User Manual

7
7.6

Sending a fax using a program destination

When a program address has been registered, a fax can be sent by specifying the registered program button.
If transmission settings (Original type and original specification etc.) are registered by a program key, a fax
can be sent by simply touching that button without the need for specifying function settings each time.
It is also possible to register a group button in 1 program button to send a fax once or register a time and
send faxes at the same time each day.

To send a fax after specifying a program destination

1
Press [Fax/Scan] key, and the Fax/Scan screen is displayed.
2
Load the original to be faxed.
– Refer to "Loading the original" on page 7-6 for details on loading the original.
3
Press [Mode Memory] key.
4
Touch [Page List].
5
Touch the page button in which the desired program destination is registered, and then touch [OK].
– Touch
7-26
or to display the previous or next page button screen.
Fax Operations (Option)
bizhub C650/C550/C451 (FE3)