Konica Minolta bizhub C550 User Manual page 385

Network Scanner Operations
4
Select the destination where the data is to be sent, and then touch [OK].
– To select all destinations, touch [Select All].
– To deselect all destinations, touch [Reset].
– Additional destinations can be added by directly typing in the address.
The button appears selected, and the destination appears under "Broadcast Destinations".
5
Touch [Scan Settings], [Original Settings] or [Communication Settings], and then specify the desired
scan settings.
– For details on the scan settings, refer to "Specifying scan and transmission settings (Scan
settings/original settings/communication settings)" on page 5-43.
6
Load the document into the ADF or place it on the original glass.
7
If desired, press the [Proof Copy] key to check a preview image.
– For details, refer to "Sending after previewing" on page 5-5.
8
Press the [Start] key in the control panel.
Scanning of the document begins, and the data is sent.
Note
Do not turn off the machine until the scan job is deleted from the Job List screen.
bizhub C650/C550/C451 (FE3)
5
5-19