Network Fax Operations (Option)
8.7
Send a fax with program destination
When the program destination is registered, a fax can be sent by specifying the registered program button.
If transmission settings (Original type and original specification etc.) are registered by a program button, a fax
can be sent only by touching that button without specifying function settings at each time.
The transmission is possible once after registering group button in 1 program button.
Sending a fax after specifying program destination
1
Press [Fax/Scan] key to display the Fax/Scan screen.
2
Load the original.
–
Refer to "Feeding the document" on page 2-30 for details on positioning the original.
3
Press [Mode Memory] key.
4
Touch [Page List].
5
Touch the page button registered by the targeted program and then touch [OK].
–
Page button is displayed on touching
bizhub C650/C550/C451 (FE3)
and
.
8
8-29