Entering Addresses Directly - Konica Minolta bizhub C550 User Manual

5

Entering addresses directly

Using the control panel to directly type in the destination address when scanning is called "direct input".
1
Press the [Fax/Scan] key in the control panel.
The Fax/Scan mode screen appears.
2
Touch [E-Mail] on the Direct Input screen.
A screen appears, allowing you to type in the address of the destination.
? Why is the Direct Input tab not displayed?
% If the "Manual Destination Input" (displayed by touching [Security Settings] on the Administrator
Settings screen, then [Security Details]) is set to "Restrict", the Direct Input tab does not appear.
3
Type in the address of the destination, and then touch [OK].
– To specify additional destinations, repeat steps 2 and 3.
– Frequently entered user names and domain names can be registered to be recalled and used again.
First, prefixes and suffixes must be registered in Administrator mode.
The entered addresses appear under "Broadcast Destinations".
4
Touch [Scan Settings], [Original Settings] or [Communication Settings], and then specify the desired
scan settings.
– For details on the scan settings, refer to "Specifying scan and transmission settings (Scan
settings/original settings/communication settings)" on page 5-43.
5-20
Network Scanner Operations
bizhub C650/C550/C451 (FE3)