Konica Minolta bizhub C550 User Manual page 525

PageScope Web Connection Operations
If "IP Address Fax" was selected
Item
No.
Name
Destination Information
Resolution
File Type
Simplex/Duplex
Original Type
Color
Separate Scan
Density
Background Removal
Scan Size
Application Setting
Password TX
F-Code
2-Sided Binding Direction
Special Original
Book Scan
Erase
Compose (Date/Time)
Compose (Page)
bizhub C650/C550/C451 (FE3)
Description
Specify the registration number.
Select "Use opening number" or "Direct Input".
If "Direct Input" is selected, type in the number. If "0" is specified, the user box
is automatically registered with the next available number.
Type in the name of the program (up to 24 characters).
Specify the destination.
Select "Select from Address Book" or "Direct Input". To select a destination
from the address book, click the [Search from List] button, and then select
from the list of address book destinations. An address book destination can
also be searched for using its number or index characters. To check the trans-
mission destinations, click the [Check Destination] button.
If "Direct Input" is selected, type in the host address. To type in the host name,
check the "Please check to enter host name." check box. If the machine is set
to use IPv6, an IPv6 address can also be specified. Type in the port number,
and then select the destination type.
Select the resolution.
Select the file format.
Select "1-Sided", "2-Sided" or "Cover Sheet + 2-Sided".
Select the document quality, such as text or photo.
Select the color mode. The file formats that can be saved may be limited ac-
cording to the Color setting.
Select either "ON" or "OFF".
Select the density.
Adjust the density of the background.
Select the document size ("Auto" or "Standard Size").
If "Standard Size" is selected, select the size and the feed direction.
Click the [Display] button, and then specify settings for the functions that are
displayed.
Select whether or not to enable password transmission. If "ON" is selected,
specify the password.
Select whether or not to enable F-codes. If "Enable" is selected, type in the
SUB address and password.
Select the position of the document binding margin.
Select "Normal", "Mixed Original", "Z-Folded Original" or "Long Original" as
the setting for the loaded document.
Specify whether to perform book scan.
To specify this item, select settings for the scanning method and center eras-
ing. If any setting other than "Book Spread" is selected for the scanning meth-
od, select the binding direction.
Select whether or not to enable frame erasing.
If "ON" is selected, specify the width that is erased on all sides of the document
("Top", "Bottom", "Left" and "Right").
Select whether or not to print the date/time.
If "ON" is selected, specify settings for the following.
• Date Type
• Time Type
• Print Position
• Fine-Tune (for making fine adjustments to the print position)
• Color
• Pages
• Size
Select whether or not to print the page number.
If "ON" is selected, specify settings for the following.
• Page Number (Range: -99999 to 99999)
• Chapter (Range: -100 to 100)
• Page Number Type
• Print Position
• Fine-Tune (for making fine adjustments to the print position)
• Color
• Size
6
6-51