Using Web Service; Specifying The Scan Command From The Control Panel Of The Machine - Konica Minolta bizhub C550 User Manual

5
5.7

Using Web Service

The scan command can be sent from a computer (Windows Vista) on the network, or this machine can scan
using the specified operation and the scan data can be sent to the computer. Two methods are available for
scanning with Web Service: the scanning method can be selected from the control panel of the machine and
the scan data sent to the computer, or the scan command can be sent from the computer.

Specifying the scan command from the control panel of the machine

The scan data will be sent to a previously registered network computer.
1
Press the [Fax/Scan] key in the control panel.
The Fax/Scan mode screen appears.
2
Touch [Web Service] on the Direct Input tab.
Network computers where this machine is registered as a Web Service scanner appear as destinations.
3
Select the desired destination, and then touch [Start].
Scanning of the document begins, and the data is sent to the computer.
5-40
Network Scanner Operations
bizhub C650/C550/C451 (FE3)