Network Scanner Operations
Sending after previewing
The following procedure describes the operations performed after a destination is specified with a Scan/Fax
program, from the address book, or by directly entering the address, and the document is positioned. For
details on specifying destinations, refer to the descriptions starting with "Sending after previewing" on
page 5-5.
1
Position the document to be scanned.
2
Press the [Proof Copy] key.
3
Select the document orientation.
–
When placed on the original glass
–
When loaded into the ADF
4
Press the [Start] key.
The document is scanned, and the Preview screen is displayed.
5
Check the preview image, and then rotate the image or change the settings, if necessary.
bizhub C650/C550/C451 (FE3)
5
5-5