Separating Copies By Pages ("Group" Setting) - Konica Minolta bizhub C550 User Manual

Copy Operations

Separating copies by pages ("Group" setting)

0 As the factory default, "Group" is selected.
0 If finisher FS-519 is installed, the output tray can be selected. For details, refer to"Selecting the output
tray" on page 2-60.
0 If offset sorting is selected while no finisher or separator is installed, printed copies will be fed out and
sorted in an alternating w and v pattern if the following conditions are met.
A4- or B5-size paper is used.
Paper of the same size and type is loaded with the w orientation in one paper tray and with the
v orientation in another tray.
The "Auto" Paper setting is selected.
The "Auto" Paper setting is not selected when the "Mixed Original" setting is selected.
0 If offset sorting is selected while a finisher ot separator is installed, printed copies are fed out and
stacked on top of each other with each set shifted to separate it.
1
In the Basic screen, touch [Finishing].
The Finishing screen appears.
2
Touch [Group].
– To separate each set of pages, touch [Yes] under "Offset".
3
Touch [OK].
The Basic screen appears again.
bizhub C650/C550/C451 (FE3)
2
2-59