Stapling Copies ("Staple" Settings) - Konica Minolta bizhub C550 User Manual

Copy Operations

Stapling copies ("Staple" settings)

!
Detail
If a Staple setting is selected, the "Sort" setting is automatically selected.
A Staple setting cannot be used together with offset sorting.
If a Staple setting is to be selected, select the orientation in which the document is positioned and the
orientation of the page to be stapled, otherwise the copies may not be stapled as desired.
Copies can be fed out stapled either in the corner or at two places.
When Finisher FS-517/FS-608 is installed
!
Detail
In order for the copies to be stapled, all of the following conditions must be met.
The paper width must be between 182 mm and 311.1 mm.
The paper length must be between 139 mm and 457.2 mm.
If the "Mixed Original" setting is selected, all copies must have paper of the same paper width.
Tray
Output tray 1
*1
Can only be used as cover sheets.
*2
Can be used only with Finisher FS-608.
*3
There are five Foolscap sizes: 220 e 330 mm w, 8-1/2 e 13 w, 8-1/4 e 13 w, 8-1/8 e 13-1/4 w, and
8 e 13 w. Any one of these sizes can be selected. For details, contact your technical representative.
Number of bound pages
Examples of the possible number of bound pages are listed below.
Finisher FS-517:
- 50 sheets of 90 g/m
- 2 sheets of 200 g/m
Finisher FS-608:
- 50 sheets of 80 g/m
- 2 sheets of 200 g/m
- 16 sheets of 90 g/m
- 2 sheets of 200 g/m
Reminder
Copies can be fed out stapled either in the corner or at two places only when the finisher is installed.
bizhub C650/C550/C451 (FE3)
Paper weight Paper size
2 2
64 g/m to 90 g/m A3 w to A5 v,
2 2 *1
91 g/m to 209 g/m 12-1/4 e 18 w
11 e 17 w to 5-1/2 e
8-1/2 w/v,
8 e 13 w
16K w/v, 8K w
2
paper
2
paper + 48 sheets of 90 g/m
2
paper
2
paper + 48 sheets of 80 g/m
2
paper
2
paper + 14 sheets of 90 g/m
Paper capacity
20 to 50 sets (A3 w, 11 e 17 w,
*2
, A5 v, 5-1/2 e 8-1/2 v)
20 to 100 sets (others)
*3
,
2
paper
2
paper
2
paper
2
2-61