Konica Minolta bizhub C550 User Manual page 474

5
6
Select a destination type, and then select the destination to be registered.
7
Touch [OK].
8
Touch [Close].
9
Touch [Icon], and then select an icon.
– The icons are used in the image panel function which can be operated when the optional LK-101 is
installed.
10
Touch [OK], and then touch [OK] in the next screen that appears.
The Group destination is registered.
!
Detail
To check a registered destination, select it, and then touch [Check Job Set.].
To change the settings for a registered destination, select it, and then touch [Edit].
To delete a registered destination, select it, and then touch [Delete].
Note
The registration cannot be completed if no settings are specified for "Name" and "Destination".
To cancel the registration, touch [Cancel].
To finish specifying settings in the Utility mode, press the [Utility/Counter] key. Otherwise, exit the Utility
mode by touching [Close] in each screen until the screen for the Copy, Fax/Scan or Box mode appears.
5-108
Network Scanner Operations
bizhub C650/C550/C451 (FE3)