Specifying The Transmission Settings - Konica Minolta bizhub C550 User Manual

3
– If recipients have been added to a group, all the members of the group can be added to "Recipient
List" (group transmission) by selecting a group name, then clicking the [Add Recipients] button.
4
Click the [OK] button.
The names that were specified are added to "Recipient List" and the Fax Transmission Popup dialog
box appears again.

Specifying the transmission settings

When sending a fax, you can specify the transmission settings in the Fax Mode Details dialog box that
appears when the [Fax Mode Setting Details] button is clicked in the Fax Transmission Popup dialog box.
Print Recipient File: Prints the document after a fax was sent.
Timer Send: Sets the transmission time. By clicking the [Reflect Current Time] button, the current time set on
the computer is displayed in the "Send Time" boxes.
SUB Address: Specifies the sub address for sending confidential faxes using F-codes.
Sender ID: Specifies the sender ID for sending confidential faxes using F-codes.
Note
When using Timer Send, check that the time set on the computer is synchronized with the time on this
machine. If the transmission time is earlier than the current time of this machine, the fax is sent the next
day.
If sending confidential faxes using F-codes to another fax model, enter the sub address and sender ID
in the "SUB Address" and the "Sender ID" text boxes. Up to 20 characters (numbers 0 through 9) can
be entered in the "Sub Address" text box. Up to 20 characters (numbers 0 through 9, #, and *) can be
entered in the "Sender ID" text box.
3-86
Print Operations
bizhub C650/C550/C451 (FE3)