Webdyn home Installation Manual page 61

The following popup window should now be displayed :
An example of a configuration using a static
IP address is shown here.
You will notice that in our example that
the gateway has been configured to use
DHCP with the host name
Webdyncast_demo. If you have a DHCP
server on your network then after
rebooting the gateway you should be
able to connect using the name you
supplied. If however, you have no DHCP
server then the gateway will boot using
the last IP address that is indicated in the
popup.
Once you have retrieved the IP address
that you were looking for then all that
remains is for you to reboot the gateway
and connect to it using this address.
Page 61