Webdynhome Scenes; Scenes Configuration - Webdyn home Installation Manual

7.4 Webdynhome scenes

Webdynhome scenes offer a manner to group similar elements within a zone in order
to create different ambiances or "mini-sequences". They are applicable for the
standard Webdynhome user interface and are also available via published URLs to
be found in section XXXXX . Using these external URLs it is possible to include
scene control within a custom Web site.
The three defined types of environmental output elements (lighting, motorised and
other) may all be controlled using scenes. Within a zone there may be up to 4 scenes
for each element type, i.e. 4 lighting scenes, 4 motorised scenes and 4 scenes
controlling "other" elements. The idea of scenes is to select each ambiance (or
scene) with a single screen click.
By default scenes are not activated, so each element configured will be accessible
individually on the user screens.

7.4.1 Scenes configuration

If you click the "activate scenes" radio button then you will be able to access the
configuration menus.
The 4 different scenes are configurable using the associated scene tabs. It is
advisable to create the scenes using the logic (where applicable) that scene 1 offers
the lowest intensity up to scene 4 the highest.
Having clicked on the
"Configure" button you will see
the menu below :
Page 43