Simple Sequence Procedure - Webdyn home Installation Manual

8.1.1.1 Simple sequence procedure

If you did not select the conditional check box then the following screen will appear :
Add the different elements of the sequence :
Choose the
zone
Type of
equipment
Equipment
name from
within the list
Specific
command to
execute
Note :
All the actions available for all types of equipment are available within a sequence,
even those actions or commands that are not available from the standard user
screens.
Once the required list of actions has been created then the sequence is ready to be
tested.
Page 48
Choose element to be
controlled (currently
environment only)
Launch delay from T0
where T0 is
immediately