Network Configuration - Webdyn home Installation Manual

6.2 Network Configuration

The current page should be :
If you wish to see or change the current IP parameters then click on IP followed by
the "Change" button and you will be able to modify the appropriate fields :
Warning
During any IP network reconfiguration you must :
Write the new IP address down in a safe place where you are sure you will be
able to find it.
Reconfigure your PC and/or LAN as a consequence of the new address
assigned to the Webdynhome
This chapter describes the procedure necessary to change from the factory assigned
IP address to an address that has been assigned for your specific LAN. Please do
not "invent" an address at random as this could have serious consequences, leave
the process to a qualified expert.
Page 22