Recover A Lost Ip Network Address - Webdyn home Installation Manual

Assuming that the previously described network parameters are correct then the
following procedures may be performed.

9.6.2 Recover a lost IP network address

This procedure enables a locally connected PC user to find the currently configured
IP address of a Webdynhome. Make sure that you are sitting at a PC configured as
shown in section 9.6.1 and that you are physically close to the Webdynhome. Launch
the Gateway Tool and click on the Getting the IP configuration button.
The warning message is asking
you to reboot the Webdynhome
now (you have a time window of
about 1 minute).
Click on the OK button.
You will see in the message window that
the PC is now trying to synchronize with
the gateway.
Page 60