Webdyn home Installation Manual page 20

These two elements are all you need to know for a very simple residential network
(where you may leave the factory default settings).
Assuming that your PC is able to connect to the correct network, then all you have to
do next is to enter the address of the Webdynhome in the address field of your Web
browser, i.e. 192.168.1.12 . This is shown in figure 1 below :
As soon as the browser makes contact with the Web server inside the Webdynhome
the welcome screen shown in figure 2 will be displayed. If this screen does not
appear then you could try to test the network connection by using a network
command such as "ping" or contact a networking specialist.
In order to proceed you must identify yourself to the
accounts are created by default by the factory settings :
A user account (login "user", password "user") which allows
access to the user screens
An administrator account (login "admin", password "admin") that
allows access to certain system parameters
Webdynhome.
Page 20
Three user