Webdyn home Installation Manual page 32

Now that you have defined your alarm(s), what happens when an alarm is triggered?
Let's look at the two possibilities :
a. Screen pop-up
this feature is to connect to a web enabled IP camera (Axis, Panasonic etc...) in
order to be able to visualize what is happening at the location of the alarm.
b. Email notification
Here the email destination user(s) will each receive an email containing the email
message that you specified for the individual alarms.
If we connect to the Webdynhome as the install user we will be able to see whether
the alarm is still active :
There is a log of recent alarms that may be viewed by clicking on the History button.
Page 32
Any connected
Webdynhome
users will receive
the following
screen pop-up.
The optional
Connexion button
will open a new
browser window to
the URL specified
earlier in this
section (the most
common use of
If the red arrow is
flashing, this indicates
that the alarm has been
triggered. You may
acknowledge the alarm
by clicking on the
Acknowledge button.
If you had configured the
alarm as being
automatically
acknowledged, then the
alarm will become non-
triggered as soon as the
input passes into the
passive state.