Setting The System Data And Time; Alarms Configuration - Webdyn home Installation Manual

6.6 Setting the system data and time

Click on the link DATE/TIME, the following page appears :
One interesting option is to synchronize the Webdynhome date & time with that of
your PC. All you have to do is to click on the radio button "PC Synchronisation" and
then hit the button "Validate".
Notice
The Webdynhome has an onboard battery to preserve the date & time even in the
event of a power outage. The summer/winter time change is not automatic (since this
is not a universal option) and therefore must be performed manually.

6.7 Alarms Configuration

One of the additional features of the Webdynhome over and above its role as a
control system is the management and notification of alarms.
The current firmware release is able to detect the change in status of any defined
input (dry contact, X10 or EIB) as the trigger event of an alarm condition. Once active
an alarm may be used to send email(s) or activate a Web based screen pop-up to
notify system users of the condition.
The definition of alarms is as usual a simple menu based solution. The initial alarm
menu is shown below :
Page 30