Chapter 5: Troubleshooting
•
Checking the System Stauts LED (below)
•
Checking Disk Status LEDs (page 76)
•
Replacing a Failed Disk Drive (page 76)
•
SmartStor Lockup (page 77)
This chapter deals problems you might encounter with your SmartStor and how
to resolve them. Also see "Frequently Asked Questions" on page 81.
Checking the System Status LED
The SmartStor system status LED (see Figure 1.) reports the condition of the
Enclosure fan and power supply:
•
Blue – Normal Enclosure function.
•
Amber – There is a problem with the fan, power supply, or disk array.
•
Red – The fan, power supply, or file system has failed.
If your SmartStor is configured to work with a UPS, it will continue to run after a
power supply failure.
75