Task 7: Making Management Connections - Promise Technology VTrak S3000 Quick Start Manual

VTrak S3000 Quick Start Guide

Task 7: Making Management Connections

Connecting the RAID Subsystem
The management connection is the same for Fiber Channel and SAS VTrak
subsystems.
To connect the RAID subsystem:
1. Connect the Management port on the left RAID controller to your network
switch.
2. Connect the Management port on the right RAID controller to your network
switch.
See the diagram, below.
Network switch
VTrak RAID subsystem
Mgmt
FC 1 FC 2
4 4
2 2
1 1
Gb/s Gb/s
115200
8 N 1
If you are adding a VTrak JBOD enclosure, the JBOD is managed
by the RAID controller on the RAID subsystem, though the SAS
connection.
There is no management connection to JBOD enclosures.
UPS
FC 1
Gb/s
Note
34
Mgmt
UPS
FC 2
4 4
2 2
1 1
Gb/s
115200
8 N 1