Maytag Bravos MED6300TQ Technical Education page 40

AIR FLUFF
Use the Air Fluff Modifier for items that require
drying without heat such as rubber, plastic
and heat-sensitive fabrics. This table shows
examples of items that can be dried using Air
Fluff.
Type of Load
Foam rubber - pillows, padded bras, stuffed toys
Plastic - Shower curtains, tablecloths
Rubber-backed rugs
Olefin, polypropylene, sheer nylon
*Reset cycle to complete drying, if needed.
When using Air Fluff
• Check that coverings are securely
stitched.
• Shake and fluff pillows by hand periodically
during the cycle.
• Dry item completely. Foam rubber pillows
are slow to dry.
NOTE: Air Fluff is not available with Sensor
Dry Cycles.
OPTIONS
You can customize your cycles by selecting
options.
DRUM LIGHT
On some models, select Drum Light to turn on
the light inside the dryer drum. During a cycle,
if Drum Light is selected, the drum light turns
on and will remain on until DRUM LIGHT is
pressed again, the door is open and closed, or
the door is left open for five minutes.
When the dryer is not running, the drum light
will turn on when DRUM LIGHT is pressed or
the dryer door is opened, and it will remain on
until the dryer door has been open for 5 min-
utes, the dryer door is closed or DRUM LIGHT
is pressed again.
Press DRUM LIGHT at any time to turn the
drum light ON or OFF.
Time*
(Minutes)
WRINKLE PREVENT
20 - 30
The Wrinkle Prevent
20 - 30
wrinkles from forming when you cannot unload
40 - 50
the dryer promptly at the end of a cycle. During
10 - 20
this option, the dryer stops tumbling and then
tumbles again for a brief period.
• Press the Wrinkle Prevent
up to 120 minutes of heat-free, periodic
tumbling at the end of a cycle.
• Stop the Wrinkle Prevent
time by pressing Wrinkle Prevent
or opening the dryer door.
• For the Wrinkle Control Cycle, the Wrinkle
Prevent
Sensor Dry Cycles will retain the Wrinkle
Prevent
the Wrinkle Prevent
cycle, the Wrinkle Prevent
the next time you select the Normal cycle.
NOTE: If you do not select the Wrinkle Prevent
setting, the dryer stops after cool down.
DAMP DRY CHIME
Select the Damp Dry Chime to alert you that
your clothes are approximately 80% dry. This
is useful when you want to remove lightweight
items in a mixed load to prevent overdrying
or remove partially dry items that may need
ironing.
The Damp Dry Chime is useful when drying
bedsheets/linens in a mixed load. When the
signal goes off, open the door to stop the dryer,
rearrange the load inside the dryer, close the
door and restart the dryer to finish the drying
cycle. Rearranging the load will aid in the dry-
ing process.
3-6
SETTING
™
setting helps keep
™
™
™
setting is preset to ON. The other
™
setting. For example, if you select
™
setting in the Normal
™
setting will be on
™
setting to get
setting at any
setting
™
™