Timed Cycles - Maytag Bravos MED6300TQ Technical Education

Sensor Dry Preset Cycle Settings
Sensor Dry Cycles
Load Type
HEAVY DUTY
Heavyweight mixed loads, cottons,
jeans
NORMAL
Corduroys, work clothes
WRINKLE CONTROL
Business casual clothes, permanent
press, synthetics
DELICATE
Lingerie, blouses, washable knit
fabrics

Timed Cycles

Use Timed Cycles to select a specific amount
of drying time and a drying temperature. When
a Timed Cycle is selected, the Estimated Time
Remaining display shows the actual time
remaining in your cycle. You can change the
actual time in the cycle by pressing the Timed
Cycle Adjust up or down arrows. See "Chang-
ing Cycles, Modifiers and Options," page 3-7.
NOTE: Timed Cycles may also be used with
the dryer rack. See "Drying Rack Option,"
page 3-7.
TIMED DRY
Use this cycle to complete drying if items are
still damp after a Sensor Dry Cycle. Timed Dry
is also useful for drying heavyweight and bulky
items, such as bedspreads and work clothes.
Lightweight garments, such as exercise wear,
can be dried using Timed Dry on a low tem-
perature setting.
RAPID DRY
Use this cycle for drying small loads or loads
that need a short drying time.
FRESHEN UP
Use this cycle to help smooth out wrinkles from
such items as clothes packed in a suitcase or
items wrinkled from being left in the dryer too
long.
Timed Preset Cycle Settings
Timed Cycles
Temperature
Load Type
TIMED DRY
High
Heavyweight, bulky items,
work clothes
RAPID DRY
Medium
Small loads
FRESHEN UP
Low
Helps to smooth out
wrinkles
Extra-Low
MODIFIERS
SENSOR DRY CYCLE MODIFIERS
Use the Dryness Modifier to select dryness
levels for the Sensor Dry Cycles. Press DRY-
NESS until the desired Dryness setting illumi-
nates.
The preset dryness setting is Normal when
an Sensor Dry Cycle is selected. You can
select a different dryness level, depending on
the load, by pressing Dryness and choosing
More, Normal, Less or Damp. Selecting More,
Normal, Less or Damp automatically adjusts
the dryness level at which the dryer will shut
off. Once a dryness level is set, it cannot be
changed without stopping the cycle.
NOTE: Dryness Level selections cannot be
used with the Timed Cycles.
TIMED CYCLE MODIFIERS
Use the Temperature Modifier to select tempera-
tures for the Timed Cycles. Press Temp until
the desired temperature setting illuminates.
NOTE: Temperature modifiers cannot be used
with the Sensor Dry Cycles.
3-5
Default Default Time
Temperature (Minutes)
High 40
Medium 24
Medium 20