Turning Off The Engine And The System; Other System Functions - Ferrari 599 GTB FIORANO Owner's Manual

With the vehicle stationary and the engine
running, hold the brake pedal down until
you are ready to start off again.
Turning off the engine and the
system (F1 gearbox)
The engine can be turned off either with
the gearshift in N or a gear engaged.
After turning the ignition key from
position II to position 0, the display will
remain on for a few more seconds to
display the gear engaged. If the gearshift
is in N, a buzzer will sound.
Do not start the vehicle before the
display has turned off.
WARNING WARNING
Never leave the vehicle with the
gearshift in N. Engage a gear (1st or
R), check that the display is not
flashing and always apply the
handbrake. Never leave the vehicle
with the engine running.
Never remove the key when the
vehicle is moving! The system and
WARNING WARNING
the display will remain active, but
malfunctioning, until the vehicle is
stopped. In addition, the steering
wheel will lock automatically with
the first turn of the steering wheel.
90
In this case, the failure warning light will
come on (see page 76) and, before
starting off again, the system and the
display must be turned off and the
"Starting" procedure repeated.
In any event, it is advisable to:
- turn off the engine and the system,
holding the brake pedal depressed
- do not request a gearshift while the
system is turning off.

Other system functions

(F1 gearbox)
"Automatic gearshift" mode
This mode is activated by pressing the
button on the centre console.
AUTO A
Activation is signalled by the script AUTO
on the gear display and on the TFT
display
�
� �
� �
����
The system will automatically shift the
gears UP and DOWN according to the
vehicle speed, the engine RPM and the
torque/power requested by the driver.
When the vehicle is stationary, if the driver
requests N, 1st gear or R, the system will
not shift from "Automatic" to "Manual".
The "Automatic" mode can only be exited
by operating the AUTO A control button.