Towing Hook; Fuel Inertia Switch - Ferrari 599 GTB FIORANO Owner's Manual

Hide thumbs Also See for 599 GTB FIORANO:
Table of Contents

Advertisement

Towing hook

When towing the vehicle, use only the
attachment point provided for the towing
hook
A
which must be inserted into its
seat B.
• Take the towing hook
out of the
A
toolkit bag.
• Remove the cap
C
from its seat B.
• Screw the hook tightly into its seat B.
C
A
B
•Position the gearshift lever in neutral
("N" position for vehicles with "F1"
gearbox).
Always follow the applicable driving
and traffic regulations when the
WARNING
WARNING
vehicle is being towed.
Do not tow the vehicle using a hook
attached to the suspension levers
WARNING
WARNING
and wheel rims, but only onto the
towing hook properly fitted in its
seat.
Keep the ignition key in position II
to allow the lights to work and to
prevent locking of the steering wheel
in the event of steering. Do not start
the engine when towing the vehicle.
Keep in mind that the power steering
and brake servo will not be working
when the engine is off.
Advice for Emergency Situations

Fuel inertia switch

This safety switch
A
is located in the pas-
senger compartment, on the underfloor, in
front of the driver's seat. In the event of a
collision, it deactivates the fuel pump relays.
Activation of this switch is signalled by the
illumination of the relative symbol on the
multifunction display (see page 70) and by
activation of the hazard warning lights.
When the switch activates, the doors are un-
locked (if they were locked) and the central
dome lights are switched on.
The system can be reactivated by
pressing the button on top of the
WARNING
WARNING
switch.
1
2
3
4
5
6
7
8
139

Advertisement

Table of Contents
loading

Table of Contents