�
The TYRES information page can also be
set as main screen page (see page 67).
In the case of specific event indication
(e.g. malfunctions with priority levels
1/2, see page 70), the screen page appears
as shown in the following example
a time equal to the entire malfunction
display cycle.
��������
������ �� ���
When the display cycle ends, the TYRES
screen page becomes available again and
the summary symbol for the malfunc-
tion is displayed in the specific area,
(screen page 1), until the malfunction is
corrected.
Low pressure
When the on-board instrument panel
receives the signal from the tyre pressure
ECU that the pressure level of one or
more tyres is below the alarm threshold,
screen page
3
will appear on the display
(regardless of the main screen page set).
2
for
����� ����
��������
If the pressure of more than one tyre
drops below the alarm threshold , the fol-
lowing screen page
is displayed.
4
����� ����
A
��������
After the display period has elapsed, the
specific screen page is no longer dis-
played.
Subsequently, if the TYRES screen page
is active, the TFT display appears as in the
following screen page 5.
following screen page 5.
Upon the next engine starting, if the fail-
ure persists, the relative warning light will
appear on the display.
Safety
1
2
3
4
5
6
7
8
41