Table of Contents
Advertisement
To memorise a new position of the
external rear-view mirrors, turn the
ignition key to position II and adjust the
position of the mirrors; then engage
reverse and reposition the external
mirrors to ensure the best possible
visibility to perform the manoeuvre, then
disengage reverse gear.
Finally, press one of the buttons 1, 2 or 3
on the seat (see page 104), each one
corresponding to a memorisable position,
until a double tone confirms the
procedure is complete.
The new position of the external rear-view
mirrors will be automatically memorised
together with the seat position.
In addition, the mirror positions can be
adjusted for both the normal travelling
direction and for reverse manoeuvring.
The mirrors must always be in the open
position while driving.
Air conditioning and heating
system
Operating modes
Automatic
This mode automatically adjusts the air dis-
tribution, temperature and ventilation levels
according to the temperature set by the user.
Partially Automatic
This mode allows the user to adjust certain
parameters manually, while others remain
automatic.
Manual
This mode allows the user to set the
values to suit the passengers' needs.
�
�
�
�
�
�
�
�
About your vehicle
Controls
A
Left-hand temperature setting
B
Air conditioning compressor
activation/deactivation
C
Left-hand air distribution setting
Windscreen defogging/demisting
D
Fan speed adjustment
E
Recirculation function
F
Right-hand air distribution setting
G
Rear window and external rear-view
H
mirrors defogging/demisting
I
Right-hand temperature setting
J
Residual heat function.
Starting
Fully automatic management: turn
controls C,
E
and
G
to the "AUT"position.
�
Deactivation
Deactivate the compressor by pressing
button
B
and turning the (fan speed)
control
to "OFF".
E
�
1
2
3
4
5
6
7
8
107
Advertisement
Table of Contents
