Switching Off The Engine And Vehicle System - Ferrari Purosangue 2023 Owner's Manual

Important note
When reverse is selected, an acoustic safety signal beeps intermittently
as long as "R" (reverse) is engaged.

Switching off the engine and vehicle system

Switching off/stopping the engine
Warning
Press ENGINE START/STOP on the steering wheel to activate the
ENGINE STOP function: if it is running, the engine stops.
If the engine has to be stopped while the vehicle is moving, press the
ENGINE START/STOP button and hold it down for at least 2 seconds.
In this way, the engine can be switched off with the gearbox either in
"N" or with a gear engaged. After the ENGINE STOP function has
been activated, the instrument panel remains on for a few seconds and
indicates which gear is engaged. If the gearbox is in "N", an acoustic
alarm that lasts 15 seconds is emitted and a pop-up appears with the
messag e "Gearbox not in Parking position". Before switching off, the
letter "P" is displayed on the instrument panel to inform the driver that
the Park Lock has been activated.
For information on the Park Lock, see chapter "Park Lock".
Warning
Never leave the vehicle with the gearbox in "N". Always make sure
that the letter "P" (Parking) appears in the gearbox area of the
instrument panel. If the Park Lock system is not working properly
(gearbox locked in "N" position), contact the F
N .
ETWORK
Warning
NEVER leave the vehicle without activating the ENGINE STOP
function.
If the driver unfastens the seat belt, opens the driver-side door, closes
it and walks away with the car key when the engine is still running, the
horn sounds 5 times to warn the driver that the engine must be switched
Starting and driving the vehicle
2
S
ERRARI ERVICE
39