�
• remove the bulb
by pulling it out-
C
wards;
• fit the new bulb by fully pushing it into
place;
• refit the bulb holder in its seat and turn
it clockwise until it locks;
• refit the connector.
Reconnect the battery (see page 140).
120
To replace the position light bulb, pro-
ceed as follows:
• remove the rubber cover
from the
D
headlight;
�
• grip the bulb holder by its tab and
remove it from its seat;
�
• replace the pressure-fitted bulb E;
• refit the bulb holder in its seat;
• refit the rubber cover D.
Refit the panel into the wheelhouse.