Table of Contents
Advertisement
"TFT" display
Located on the instrument panel, it
performs the following functions:
- indication of the control parameters
- indication of general information while
driving
- fault warnings.
The driver can interact with the system by
choosing graphic configurations and
setting the parameters.
Three different screen areas are available,
depending upon the display type chosen:
A
display of information shared by all
configurations (with the exception of
the driving mode icon)
display of virtual control gauges and of
B
information generated by specific
events and/or on request
C
permanent display of information
(shared by all configurations).
The screen areas
A
and
C
are always
present in all display configurations set by
the driver.
The screen areas
and
can be
B
C
displayed with two colour options:
- day (white background)
- night (black background).
The screen area
A
can be displayed with
five different colour options, based on the
driving modes set through the Manettino.
� �
�
�
The screen page is activated and set by
pressing the buttons DISP and MODE on
the control panel, to the right of the
steering wheel, and by pressing the
buttons UP, DOWN and ENTER located
behind the steering wheel.
About your vehicle
MODE
Button pressed momentarily (
- the "complete" MENU page is displayed
if the vehicle speed is below 5 km/h –
3 mph
- the "minimised" MENU page is
displayed if the vehicle speed exceeds 5
km/h – 3 mph
- within a submenu: back to last page
displayed
- odometer flashing: back to previous
information
�
- exits the display of the various check
phases when the key is turned to ON
- the malfunctions are iconised if the
�
button is pressed during fault warnings.
�
1
2 sec):
<
2
3
4
5
6
7
8
63
Advertisement
Table of Contents
