Replacing remote control batteries
If the respective function is not activated
when one of the three buttons on the key
is pressed, replace the remote control bat-
teries after first checking that the alarm
system functions are working with the
other remote control.
Replace the remote control batteries as
follows:
- lever open the key cover
C
with a small
screwdriver at the position indicated by
the arrow;
�
- remove the battery D, pushing in the di-
rection indicated by the arrow to release
it from the retainer cover E;
- fit a new battery of the same type, re-
specting the polarity as indicated;
- close the key cover C.
�
�
Do not use sharp implements to open
the key cover and take the utmost care
not to damage the remote control.
Electronic alarm
The electronic alarm system performs the
following functions:
- remote control for central door locking/
unlocking;
- perimeter surveillance, detecting the
opening of doors and lids;
- motion surveillance, detecting intrusion
into the passenger compartment;
- vehicle movement surveillance.
Activation
General
To turn on the alarm system, press
button
on the key:
F
- the direction indicators flash once;
- the system beeps;
- the red LED on the dashboard flashes;
- the central door locking system is
activated and the doors are locked.
The system activates after approximately
25 seconds.
1
2
3
4
5
6
7
8
13