Table of Contents
Advertisement
�
When the maintainer has been connected
to the socket of the vehicle, pass the
connection cable beneath the luggage
compartment lid, in the outer rear corner.
The connection cable should not
emerge from the car in positions other
than the one indicated, as this could
cause damage to the seal strips and/or
the cable itself.
If the car is not to be used for periods
longer than one week, we recommend
that you connect the maintainer in order
to keep the battery in good working
order.
142
Vehicle start-up is inhibited as long
as the maintainer is connected to the
WARNING
WARNING
socket in the car.
Further technical information concerning
the use of the device is given in more
detail in the manual located in an inner
pocket of the bag containing the car
cover.
Exhaust system overheating
alarm devices
If the exhaust system overheats, the relative
symbol appears on the TFT display together
with a warning message. The warning mes-
sage has two different alarm levels: high
temperatures or extreme temperatures.
The warning light display is controlled by
the thermoresistor, through the engine
ECU.
If the temperature is high:
the driver must slow down immediately
WARNING
WARNING
so that the exhaust system temperature
drops.
Advertisement
Table of Contents
