Roof panel controls
Deactivating the alarm system
motion sensors
Pressing button
A
deactivates the motion
sensing feature of the alarm system.
When this feature is deactivated, the LED
on the button flashes for about 3 seconds
and then turns off.
�
�
�
78
Deactivating the anti-lift alarm
system
Pressing button
deactivates the anti-lift
B
alarm system.
When this feature is deactivated, the LED
on the button flashes for about 3 seconds
and then turns off.
Tyre pressure calibration button
To calibrate the system, when the key is
in position II, press button
until the
C
message "calibrazione attivata"
(calibration started) appears on the TFT
display.
The system will take a maximum of
20 minutes to complete the calibration
procedure with the vehicle in motion.
For further information, please see the
"Tyre pressure and temperature
monitoring system" (see page 40).