Table of Contents
Advertisement
The system may not know which wheel is
originating the malfunction and therefore
is not capable of indicating the wheel
involved. In this case, screen page
be displayed.
����� ����
��������
After the display period has elapsed, the
specific screen page is no longer dis-
played.
The TYRES screen page showing the
pressure of each individual tyre is not ac-
cessible by the driver.
Also in this case, if the pressure mal-
function persists, upon the next engine
starting the display will show the relative
screen page. Subsequently the symbol
will be viewed in the area dedicated to
the warning lights, until the situation is
corrected, as is the case for other priority
level 2 malfunctions.
42
Tyre punctures
When the on-board instrument panel
receives the signal from the tyre pres-
6
will
sure monitoring ECU indicating that the
pressure of one or more tyres is below
the alarm threshold, this is displayed in
the following screen page 7. The relative
warning light simultaneously illuminates
on the instrument panel (see page 77).
��� ����
��������
The same display logic is applied for other
priority level 0 malfunctions, until the
situation is corrected and the system is
recalibrated (following a key-off and key-
on cycle).
On vehicles equipped with "Run Flat" tyres,
screen page
is shown instead, alternating
7
with the following screen page 8 four times.
with the following screen page
four times.
8
��� ����� �����
Subsequently, the symbol will be dis-
played in the area dedicated to the warn-
ing lights until the situation is corrected,
as is the case for all other priority level 2
malfunctions.
If the TYRES screen page is set as the
main page, screen page
9
will be dis-
played.
played.
Advertisement
Table of Contents
