Replacing the number plate light bulb
To replace a number plate light bulb,
proceed as follows:
• loosen the two fastening screws;
�
• remove the transparent cover
A
from
its seat and replace the bulb
which is
B
pressure-fitted between the two contact
clips;
• refit the transparent cover and screw
down the two fastening screws.
Replacing the auxiliary stop light bulb
To replace the light cluster, please con-
tact the Ferrari Service Network.
122
Replacing other light bulbs
Roof dome light
• Gently pry out with a screwdriver at
point
C
to remove the dome light
from the roof.
�
�
• Replace the light bulb
E
D
• Refit the dome light, making sure that
the cables are not crushed, inserting it
�
first from the connector side and then
pushing on the opposite side.
or F.
�
�