Table of Contents
Advertisement
Once the check procedure is successfully
completed, the word "Check" will be
replaced by "Check OK" on a green
background.
When the engine is started, regardless of
the main screen page set, the words
"ENGINE ON" will be displayed.
70
TFT display warning lights
Priority level 0 (Extremely critical
malfunction): remains displayed for an
unlimited period of time, until the
problem is corrected.
Priority level 1/Priority level 2 (Critical
malfunction/Non-critical malfunction):
remains displayed for 20 seconds in the
middle of area
and is then minimised.
B
It remains displayed (minimised) at the
bottom left of area
B
until the problem is
corrected.
Alarm system failure
Indicates a fault in the alarm system
(priority level 1).
The system is not programmed
(priority level 2).
It may be associated with messages.
Contact the Ferrari Service
Network.
Fuel reserve
Indicates that the fuel level is too
low (priority level 2).
Battery conditioner connected
When the instrument panel is on, it
indicates that the connection with
the battery conditioner is active
(priority level 0).
Inertia switch
Indicates activation of the inertia
switch following an accident and the
resulting cut-out of the fuel supply
(priority level 0).
Alternator
Indicates an alternator failure
(priority level 1).
Low windscreen washer fluid level
Indicates a low level of washer fluid
in the windscreen washer tank
(priority level 2).
Oil temperature
Indicates that the oil temperature is
too high (priority level 0).
Advertisement
Table of Contents
