These warnings and safety notes are particularly important. Please follow the
instructions for maximum safety; otherwise the charger and the battery can be
damaged or at worst it can cause a fire.
Never leave the charger unattended when it is connected to its power supply. If
any malfunction is found, TERMINATE THE PROCESS AT ONCE and refer to
the operation manual.
Keep the charger well away from dust, damp, rain, heat, direct sunshine and
vibration. Never drop it.
The allowable DC input voltage is 11~18V DC
This charger and the battery should be put on a heat-resistant, noninflammable
and nonconductive surface. Never place them on a car seat, carpet or similar.
Keep all the inflammable volatile materials away from operating area.
Make sure you know the specifications of the battery to be charged or
discharged to ensure it meets the requirements of this charger. If the program is
set up incorrectly, the battery and charger may be damaged .It can cause fire or
explosion due to overcharging.
Standard Battery Parameters
LiPo
Nominal
3.7V/cell
Voltage
Max Charge
4.2V/cell
Voltage
Storage
3.8V/cell
Voltage
Allowable
≦1C
Fast Charge
Min. Discharge
3.0-3.3V/cell 2.9-3.2V/cell 2.6-2.9V/cell 0.1-1.1V/cell 0.1-1.1V/cell 1.8V/cell
Voltage
Be very careful to choose the correct voltage for different types of battery otherwise
you may cause damage to the batteries. Incorrect settings could cause the cells to
fire or explode.
B6 mini
WARNING AND SAFETY NOTES
LiIon
LiFe
3.6V/cell
3.3V/cell
4.1V/cell
3.6V/cell
3.7V/cell
3.3V/cell
≦1C
≦4C
NiCd
MiMH
1.2V/cell
1.2V/cell
1.5V/cell
1.5V/cell
n/a
n/a
1C-2C
1C-2C
Pb
2.0V/cell
2.46V/cell
n/a
≦0.4C
05 ·