Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Skyrc Ultimate Duo 400W AC/DC
Summary of Contents for Skyrc Ultimate Duo 400W AC/DC
- Page 1 BALANCE CHARGER / DISCHARGER / POWER SUPPLY Instruction Manual [Version 1.5]...
-
Page 2: Table Of Contents
Table of Contents Introduction Special Features Warning and Safety Notes Program Flow Chart Operation Power and Battery Connection Operating Program Lithium Battery Program (LiPo/LiFe/Lilon/LiHV) NiMH/NiCd Battery Program Pb Lead-Acid Battery Program DJI TB4X Battery Program DC Power Supply Battery Memory Set and Call Out System Setting Battery Meter Battery Resistance Meter... -
Page 3: Introduction
Current Limit, Capacity Limit, Temperature Threshold and Processing Time Limit which makes the charger safe to use. SKYRC D400 can charge DJI TB4X battery with an optional charging cable (SK- 600023-05), which is not included in the package. Please BE SURE to read these INSTRUCTIONS, WARNING and SAFETY NOTES before you use the charger for the first time. - Page 4 Introduction Please read this entire operating manual completely and attentively before using this product, as it covers a wide range of information on operating and safety. Or please do use this product in company with a specialist! LCD Display Output Socket 4mm Banana Cooling Fan Plug...
-
Page 5: Special Features
Special Features Twin-channel Charger SKYRC D400 allows you to plug 2 batteries into one charger simultaneously, and it will intelligently and automatically charge 2 battries at once to their maximum capacity. To top of it, the batteries being charged do not even need to have the same configuration. You can connect different chemistry(NiMH/NiCd/LiPo/LiFe/Lilon/LiHV/Pb)batteries into any of the charging ports. - Page 6 Adaptable to Various Type of Lithium Battery SKYRC D400 is adaptable to various types of lithium batteries, such as LiPo, LiIon and the new LiFe series of batteries. LiHV Mode Available The additional LiHV mode is able to charge the new generation of LiPo batteries with an end of charge voltage 4.35 V.
- Page 7 Special Features Re-Peak Mode of NiMH/NiCd Battery In re-peak charge mode, the charger can peak charge the battery once, twice or three times in a row automatically. This is good for making certain the battery is fully charged. Delta-peak Sensitivity for NiMH/NiCd Delta-peak sensitivity for NiMH/NiCd battery: The automatic charge termination program based on the principle of the Delta-peak voltage detection.
-
Page 8: Warning And Safety Notes
Warning and Safety Notes These warnings and safety notes are particularly important. Please follow the instructions for maximum safety; otherwise the charger and the battery can be damaged or at worst it can cause a fire. Never leave the charger unattended when it is connected to its power supply. If any malfunction is found, TERMINATE THE PROCESS AT ONCE and refer to the operation manual. - Page 9 Warning and Safety Notes Never attempt to charge or discharge the following types of batteries. A battery pack which consists of different types of cells (including different manufacturers) A battery that is already fully charged or just slightly discharged. Non-rechargeable batteries (Explosion hazard). Batteries that require a different charge technique from NiCd, NiMh, LiPo or Gel cell (Pb, Lead acid).
- Page 10 Warning and Safety Notes Attention should be paid to the connection of lithium battery especially. Do not attempt to disassemble the battery pack arbitrarily. Please get highlighted that lithium battery packs can be wired in parallel and in series. In the parallel connection, the battery s capacity is calculated by multiplying single battery capacity by the number of cells with total voltage stay the same.
-
Page 11: Program Flow Chart
Program Flow Chart Note: The flow chart is taking one channel for example as the flow chart for the two channels (Channel 1 and Channel 2) are identical. START LiPo BALANCE CHG LiPo CHARGE LiPo FAST CHARGE LiPo STORAGE LiPo DISCHARGE BATT/PROGRAM 2.0A 7.4V (2S) -
Page 12: Operation
Operation BATT PROG / STOP Button: It is used to stop the progress or go back to previous step/screen DEC Button: It is used to go through the menus and decrease the parameter value INC Button: It is used to go through the menus and increase the parameter value ENTER / START Button: It is used to enter parameter or store parameter on screen. -
Page 13: Power And Battery Connection
Power and Battery Connection 1. Connecting to power source There are two kinds of inputs for SKYRC D400, DC 11-18V and AC 100-240V. AC 100-240V power source connection. 12V DC Battery / DC power supply connection. D400 11 ·... - Page 14 Power and Battery Connection Note: We will explain the operating procedure of one channel as the procedure for channel 1 and 2 is identical. 2. Connecting the battery TO AVOID SHORT CIRCUITS, ALWAYS CONNECT THE CHARGE LEADS TO THE CHARGER FIRST, AND THEN TO THE BATTERY. REVERSE THE SEQUENCE WHEN DISCONNECTING THE PACK.
-
Page 15: Operating Program
Channel 1 and Channel 2 is identical. 1. Connection Connecting to power source There are two kinds of inputs for SKYRC D400, DC 11-18V and AC 100-240V. A. Operating in AC mode SKYRC D400 comes with built in switching power supply. You can connect the AC power cord directly to the main AC socket. - Page 16 The balance wire attached to the battery must be connected to the charger with the black wire aligned with the negative marking. Take care to maintain correct polarity! (See the wiring diagram below.) This diagram shows the correct way to connect your battery to the SKYRC D400 while charging. WARNING: Failure to connect as shown in this diagram will damage this charger.
-
Page 17: Lithium Battery Program (Lipo/Life/Lilon/Lihv)
Lithium Battery Program (LiPo/LiFe/Lilon/LiHV) The following flowcharts show the entire programming menu. It is highly recommended to keep these flowcharts handy while you learn how to operate this charger. There are two main ways to program the charger. A memory profile is available for setting and storing pertinent information for up to 40 different program sets;... - Page 18 Lithium Battery Program (LiPo/LiFe/Lilon/LiHV) BATTERY CHECK The charger is detecting the battery cell. WAIT... R shows the number of cells detected by the charger and S is R:3SER S:3SER CANCEL(STOP) the number of cells set by you on the previous screen. If the two numbers are not identical, press STOP to go back to the previous screen to recheck the number of cells of the battery pack that you set before going ahead.
- Page 19 Lithium Battery Program (LiPo/LiFe/Lilon/LiHV) VARIOUS INFORMATION DURING THE PROCESS Press INC or DEC during the charging or discharging process to view further pertinent information on the LCD screen. LP4s 1.5A 12.14V Real-time status: battery type, battery cell count, charge current, battery pack total voltage, elapsed time and charge capacity.
-
Page 20: Nimh/Nicd Battery Program
NiMH/NiCd Battery Program NiMH/NiCd: This program is only suitable for charging/discharging NiMH/NiCd batteries. The D400 offers the following NiMH/NiCd charge modes: Charge, Auto Charge, Discharge, Re-Peak and Cycle. Selecting the Battery Type: After powering on the D400, press the INC or DEC button repeatedly until you reach the appropriate program for the battery type you wish to charge. - Page 21 NiMH/NiCd Battery Program After selecting the correct battery type, use the INC or DEC NiMH Auto CHARGE button to change the charge mode to the “Auto CHARGE” CURRENT 1.3A setting. Press the START button and the amp rate value will begin flashing.
- Page 22 NiMH/NiCd Battery Program When discharging is complete, the screen will read “END: [ TIME: 00:04:04 ] 9.6V 00640mAh CUTOFF-VOL” and the charger will emit a ringing sound. The charger will display the elapsed time, end voltage and the discharged capacity in mAh. You can press the STOP button at any time during the discharging process to stop the discharge process.
- Page 23 NiMH/NiCd Battery Program NiMH/NiCd Cycle Mode: The D400 makes cycling of NiMH/NiCd batteries easy. The process of discharging and recharging (cycling) can be performed automatically with one simple step and will improve the performance of NiMH/NiCd batteries. We strongly recommend cycling any battery that has been discharged and stored for a period of time.
-
Page 24: Pb Lead-Acid Battery Program
Pb Lead-Acid Battery Program Additional NiMH/NiCd Process Information: During the NiMH/NiCd battery charging/discharging process the D400 can display a variety of information. Using the INC or DEC buttons, you can also view the following information: Delta Peak Voltage In Power Voltage NiMH Sensitivity Input Voltage Sensitivity setting... - Page 25 Pb Lead-Acid Battery Program Press the START button again and the nominal battery pack Pb Charge voltage will begin flashing. Use the INC or DEC button to set the 1.5A 12.0V(6P) voltage and the number of cells. Press and hold the START button for 3 seconds to start charging.
-
Page 26: Dji Tb4X Battery Program
DJI TB4X Battery Program This program is dedicated for DJI TB4X* intelligent flight battery with an optional charging cable (SK- 600023-05). And it consists of CHARGE and STORAGE modes. *TB4X stands for model TB47, TB48, TB47S, TB48S. TB47S TB48 BATT/PROGRAM Select BATT/PROGRAM Press INC and DEC to go through all the programs and press DJI TB4X BATT... -
Page 27: Dc Power Supply
DC Power Supply Your Ultimate Duo 400W can supply 150 Watts DC Power on channel 2. You can use it to power equipments that require DC power. It converts standard household power 100- 240V AC to 6-15V DC power. Be aware that the DC power supply can be used by Channel 2, and the charge mode is not available, when you are using channel 2 as DC power supply. - Page 28 Battery Memory Set and Call Out The charger can store up to 20 different charge/discharge profiles(each channel 10 sets) for your convenience, and the stored profiles can be recalled quickly without having to go through the setup process. When you are willing to alter the parameter value in the program, press START/ENTER to make it blink then change the value with INC or DEC.
-
Page 29: Battery Memory Set And Call Out
Battery Memory Set and Call Out S A V E P R O G R A M S A V E . [ B A T T M E M O R Y 1 ] Indicate the battery type and battery cell of the saved profile. L i P o 7 . - Page 30 System Setting It will be operated with the default value of the essential user settings when it is powered on for the first time.The screen displays the following information in sequence and the user can change the value of parameter on each screen. When you are willing to alter the parameter value in the program, press START/ENTER to make it blink then change the value with INC or DEC.
-
Page 31: System Setting
System Setting ITEM SELECTION DESCRIPTION N i M H S e n s i t i v i t y This program is for NiMH/NiCd battery only. D . P e a k D e f a u l t Default: 4mV/Cell When the charger detects the delta peak value reaches the value you set, the... -
Page 32: Battery Meter
Battery Meter The user can check battery's total voltage, the highest voltage, the lowest voltage and each cell's voltage. Please connect the battery to the charger main battery lead to battery socket and balance wires to balance socket. This diagram shows the correct way to connect your battery to check the voltage. -
Page 33: Battery Resistance Meter
Battery Resistance Meter The user can check battery's total resistance, the highest resistance, the lowest resistance and each cell's resistance. Please connect the battery to the charger main battery lead to battery socket and balance wires to balance socket. This diagram shows the correct way to connect your battery to check the resistance. -
Page 34: Warning And Error Message
Warning and Error Message In case of an error the screen will display the cause of error and emit an audible sound. Incorrect polarity connected. The battery is interrupted. C O N N E C T E R R O R Thebattery connection is wrong. -
Page 35: Using The Charge Control Software "Charge Master
“A” plug and the opposite end is terminated with “micro-B” plug which can connect to charger directly. You can control, monitor, operate and upgrade two channels with one computer. The “Charge Master” can be download from www.skyrc.com. THESETCONTAINS 1. SKYRC Ultimate Duo 400W 2. -
Page 36: Specification
Specification DC Input Voltage : 11-18V AC Input Voltage: 100-240V Display Type: 2x16 LCD Display Backlight: Blue Case Material: Metal Controls: Eight Buttons Case Size: 258x194x82.5mm Weight: 2510g DC Power Supply Output: 6-15V / Max. 10A PC Communications: USB Port for PC Control & Firmware Upgrade External Port: 2-7S Balance Socket-XH, Temperature Probe Socket, Battery Socket, DC Input, Micro USB Port for PC. -
Page 37: Conformity Declaration
Conformity Declaration This appliance can be used by children aged from 14 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. -
Page 38: Commonly Used Terms
Commonly Used Terms Commonly used terms Final charge voltage: the voltage at which the battery's charge limit (capacity limit) is reached. The charge process switches from a high current to a low maintenance rate (trickle charge) at this point. From this point on further high current charging would cause overheating and eventual terminal damage to the pack. -
Page 39: Warranty And Service
Liability exclusion This charger is designed and approved exclusively for use with the types of battery stated in this Instruction Manual. SkyRC accepts no liability of any kind if the charger is used for any purpose other than that stated. - Page 40 Latest version can be downloaded from www.skyrc.com If you have any question about this document, please contact SkyRC by sending a message to info@skyrc.cn All Rights Reserved. Printed in China 2022.09...